Back to Guides

Unitree B2 Guide: Price, Specs and B2 vs Spot vs ANYmal for Inspection

The Unitree B2 industrial quadruped explained: live US price, verified specs, how it compares with Boston Dynamics Spot and ANYbotics ANYmal for inspection, and what to plan before deployment.

The Unitree B2 is Unitree's heavy industrial quadruped. At about 60 kg it is four times the mass of a Go2, and it is built for payload, endurance and weather rather than for a lab bench. This guide covers what the B2 costs from our US store, the specifications Unitree publishes, how it compares with Boston Dynamics Spot and ANYbotics ANYmal for inspection work, and what to plan before you deploy one.

Current store price: $85,800.00 (product page). The price updates from the store automatically.

Who the B2 is for

  • Inspection and patrol programs that need to carry heavier sensor payloads for hours, outdoors, in rain and dust.
  • Research groups working on rugged locomotion that need a platform able to absorb falls and carry their own compute and sensors.
  • Logistics and field-robotics pilots where the robot has to move real loads, not just itself.

If your work fits on a 15 kg robot carrying a few kilograms, a Go2 EDU-class unit costs a fraction as much and is far easier to transport and operate. The B2 earns its price only when payload, runtime or ruggedness is the constraint.

Specifications

From Unitree's B2 page and our product listing:

Spec Unitree B2
Weight (with battery) ≈ 60 kg
Standing size 1098 × 450 × 645 mm
Top speed > 6 m/s
Peak joint torque about 360 N·m
Standing load ≥ 120 kg
Continuous walking load > 40 kg
Endurance, 20 kg load > 4 h, > 15 km
Endurance, unloaded > 5 h, > 20 km
Battery 45 Ah (2,250 Wh), 58 V, quick-change
Slope > 45°
Long jump > 1.6 m
Ingress protection IP67
Operating temperature −20 °C to 55 °C
Options Wheeled feet; autonomous charging dock

Unitree states endurance at a 20 kg load, not at the 40 kg maximum. Plan routes from the 20 kg figure and measure your own sensor payload's effect in a pilot.

B2 vs Spot vs ANYmal for inspection

These three come up together in every industrial inspection evaluation. The figures below are each manufacturer's own published numbers. They are measured differently by each vendor, so read them as orders of magnitude, not as a head-to-head benchmark.

Unitree B2 Boston Dynamics Spot ANYbotics ANYmal
Weight ≈ 60 kg 33.8 kg not listed on product page
Payload > 40 kg walking 14 kg 10 kg additional
Speed > 6 m/s top 1.6 m/s max 0.75 m/s normal walking
Runtime > 4 h at 20 kg ~90 min average 90–120 min
Ingress protection IP67 IP54 IP67
Operating temperature −20 to 55 °C −20 to 55 °C not listed on product page
Source unitree.com/b2 bostondynamics.com/products/spot anybotics.com/robotics/anymal

How the choice usually falls:

  • B2 wins on payload, speed and runtime per charge. It is also the only one of the three we sell with a published price. Choose it when you are integrating your own sensors and autonomy and want the most hardware per dollar.
  • Spot wins on ecosystem maturity: first-party payloads and inspection software from one vendor, and a commercial track record going back to its 2020 launch. Choose it when you want a complete, vendor-supported inspection product rather than a platform. Spot is priced per configuration. Our Spot vs Go2 comparison covers the price side.
  • ANYmal is built around autonomous industrial inspection, with a pan-tilt payload that carries thermal and acoustic sensing. ANYbotics also sells ANYmal X, which is ATEX and IECEx certified up to Zone 1 IIB. Choose ANYmal when hazardous-area classification or a turnkey inspection workflow drives the decision.

For a lighter inspection platform, look at the Go2-W Inspection Package (current store price: $32,199.00). For Unitree's newer industrial line, see the A2 Pro (current store price: $40,800.00).

Before you deploy a B2

  1. Handling and transport. At about 60 kg the B2 is a two-person lift. Plan a cart or case and a loading route before delivery, not after.
  2. Battery logistics. The pack is quick-change. For shifts longer than one pack, budget spare batteries and a charging station near the route, or evaluate the autonomous charging dock.
  3. Payload integration. Decide where sensors mount and how they are powered and networked, and weigh the finished payload. Your payload weight sets your real runtime.
  4. Safety zone and operating procedure. A fast, heavy legged robot needs a defined operating area, a trained operator with the emergency stop, and a written recovery procedure for falls.
  5. Pilot on the real route. Run the exact inspection route on the actual surfaces (grating, stairs, wet concrete) before committing to a fleet.

FAQ

How much does a Unitree B2 cost? $85,800.00 from our US store today. Payload integration, spare batteries and any optional dock or wheeled feet are extra.

Is the B2 waterproof? Unitree rates it IP67, the same rating ANYbotics publishes for ANYmal and higher than Spot's IP54.

B2 or A2? The A2 family is Unitree's newer, lighter industrial line. Compare current listings in the robot dog price guide, or ask us which fits your route and payload.

Is the B2 affected by the FCC Covered List? On July 28, 2026 the FCC added foreign-produced "advanced robotic devices", which it defines as mobile robots such as humanoids and quadrupeds, to its Covered List. According to the FCC fact sheet, the update "does not prohibit the import, sale, or use of any existing models" the FCC previously authorized, and it "does not affect any previously purchased devices." New models generally cannot receive FCC authorization. Ask us for the FCC ID of the exact configuration before you order if compliance matters to you.

Related